Maximum security: the Nakavision C1 works even offline
Want to cut your camera off from the internet completely? Here’s how the Nakavision C1 keeps working on your local network.
Data protection without compromise: how the Nakavision C1 works fully offline, on your local network
When you choose a security camera to protect your home or business, the most important question alongside picture quality is data security: where does your data travel across the internet?
When we designed the Nakavision C1, our main priority was protection that is flexible but uncompromising. While the camera’s cloud and remote-access features work to strict standards, we also built the system to run in the most security-conscious environments, completely cut off from the outside world, with no internet connection at all.
European-standard security from the ground up
Before we turn to fully offline operation, it’s important to stress that the Nakavision C1 is built to keep your data safe even with its factory settings.
The architecture of the 5.07.X02 firmware also meets European data-protection requirements:
- European and UK servers: The traffic needed for remote access runs through strictly controlled servers in Europe and the UK, hosted on Amazon Web Services.
- Strengthened network protection: The latest firmware enables even stronger encryption and network data protection, and we are continually improving security. Recent firmware has also added a password-protected bootloader, more stable microSD card handling and refined ONVIF/RTSP memory management.
Zero internet, 100% control: running the C1 local-only
There are situations, however – for example, strict corporate security rules, sensitive private spaces that need protecting, or simply a deliberate choice to build a cloud-free smart home – where the only acceptable option is for the camera to send no data packets directly to the internet at all. The Nakavision C1’s hardware and software are designed to work this way.
How does this work in practice?
- One-time activation: The camera needs internet access just once, during its very first setup, when it joins your local network over Wi-Fi or cable.
- Blocking at the router: After pairing, you can completely block the camera’s outgoing and incoming internet access from your router’s admin page, by its MAC address or fixed IP address, or by moving it to a separate IoT VLAN with no internet access.
- Uninterrupted local operation: Unlike cameras that depend on the cloud and keep restarting or stop recording without internet access, the Nakavision C1 carries on working as a full security camera on your local network (LAN).
How can you reach the camera remotely if it’s blocked from the internet?
If you cut the camera off from the internet, you can no longer reach it directly from outside your home network through the iCSee app, because the camera can’t communicate with the external cloud servers. iCSee’s push alerts stop too. This is where one of the Nakavision C1’s biggest design advantages comes in: native support for open industry standards.
Thanks to ONVIF Profile S (ONVIF version 21.06) and RTSP support, made more secure in the latest firmware, the camera can be integrated directly, over your local network, into standalone smart-home hubs and recorders such as:
- Home Assistant (via the ONVIF or Generic Camera integration, or through Frigate NVR)
- Local NVR systems and NAS servers (e.g. Synology Surveillance Station)
- Dedicated VMS software (e.g. SecuritySpy, Blue Iris)
The perfect combination: Nakavision C1 + Home Assistant
If you connect the camera to your local Home Assistant system, all communication between the camera and the hub (the live view from both lenses, PTZ control, motion detection events and alarm commands) stays entirely within your home, on your local network.
And when you’re away from home, Home Assistant’s own Companion app on your phone still lets you watch the Nakavision C1 live from anywhere, review its alerts, and pan and tilt the camera. The app reaches Home Assistant over a remote-access route that you control, such as your own VPN or Home Assistant Cloud’s encrypted connection. Home Assistant relays the picture, so the camera itself never connects to the public internet. Can you beat that?
Who do we recommend this solution for?
- Informed smart-home builders: Those who want to control every device from one central system (e.g. Home Assistant), independently of external cloud services.
- Businesses and offices: Where internal IT policy forbids security cameras from communicating with external servers.
- Privacy-minded users: Anyone who simply wants to know that control over their security footage is entirely in their own hands.
You can install Nakavision cameras the way that suits you: for a quick start, all you need to sort out is power – the camera joins your network over Wi-Fi, and you’re protected in 5 minutes. If you’d like to step up security, you can swap Wi-Fi for a wired Ethernet connection: the C1 is PoE-injector compatible, so one cable can carry both power and data. And if you want to go further still, you can cut the camera off from the internet. The choice is yours.
Still stuck?
Our UK team can help with setup, warranty and returns. We usually reply within one working day.
Contact support Back to support